落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高额定电压小电流量检验仪(耐脉冲检验仪)-(计算出机调控)

High voltage low current tester (arc resistance tester) - (computer control)

商商品名字称:耐电弧试验机

Product name: electric arc resistance tester

软件技术参数:NDH-A

Product model: NDH - A

满意细则:GB/T 1411-2002《液体接地相关材料耐高低平交流电电弧自放电自放电的应力测试》(等同于IEC  61621-1997)及ASTM D495等的要求的的要求设计的概念加工的,并符合标准IEC 149、UL 746A等经过多次实验发现技术

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要可用于范围内及系统:

本可靠性试验仪是按落球回弹试验仪,介电击穿强度测定仪于直流电机、电子产品和家庭居民用电子产品等市场的焊工用塑胶板材制品、光敏不饱和树脂胶和接地层漆等接地层板材的耐电弧焊接焊接特点评比,主用在混合物接地层板材如:塑胶板材制品、薄膜和珍珠棉、光敏不饱和树脂、白云母、工业陶瓷、磨砂玻璃、接地层油、接地层漆、瓦楞纸等媒介的耐电弧焊接焊接特点测验;

本检验机由算机操作正常运行,是可以凸显在当下状况检测所性感觉及检测所性准确时间,检测所性收尾后并留存在当下状况检测所性数据显示,并可打印文件.标准规范实践评估。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为下一梯的结构,下边为运营系统性,上面为可靠性湿热试验箱。

2 本软件选取*新自动化控住方法,按照首选软件程序(IEC或ASTM)可自己确定实验室检测,并在手机上展现试验台流程和后果。

3 **效果充分,抗干拢本事强,测试方法要求高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断时候偏差:值为 ±10ms

2 调压器数量:2kVA

3 额定的经过多次实验发现工作电压:12.5kV

4 经过多次实验发现的电压导致精度:±3%

5 工作电流的控制精确:±10%  功率测定要求:1.5%

6 金属电极对样品有压力:(0.5±0.05)N

7 工业素材:钨棒

8 电极片的距离:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 动用工作环境工作温度:(23±2)℃

10 使用的氛围室内温度:(50±5)%

11 开关电源:220V±5%  50Hz  10A

12 可靠性试验    策略:   执行标准/美标/10 mA 重复/20 mA 不间断/30 mA间隔/40 mA多次

13 实验室检测执行程序下列:

程序代码段

焊弧直流电

mA

焊弧通断用时s

各源程序段持续保持事件s

检测总时刻s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

维持通

60

240

5

20

间断通

60

300

6

30

累计通

60

360

7

40

不断通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

号码

名称大全

數量

微信备注名

01

耐脉冲测评仪

买台

 

02

工业控制系统

一款

 

03

电极材料支架

一种

 

04

电原高压电缆

一系列

 

05

接地极放**

一批

 

06

电压毫安表

一部

 

07

台式机测控平台

一系列

 

08

岩样架

一个

 

09

电极片范围规格块

2块

 

10

斜度标准的块

2块

 

11

淘瓷片

2片

 

12

喷墨缩印机

1台

的品牌

13

算机

1台

高端品牌

14

施用表明书

1份

 

15

适合证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 的产品类型:

NDH-A    耐电弧放电实验室检测仪-微机有效控制

NDH-B    耐焊弧检验仪-触模屏保持

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪